Welcome visit RFID & Security Warehouse!

Category Navigation:

5 8G 1W ing audio audio closewireless video transmitter receiver pair for CCTV monitor


Availability: In stock

Be the first to review this product

5.8G 1W ing audio audio closewireless video transmitter receiver pair for CCTV monitor
Model : 1255378590



Detailed parameters:

Frequency 5.8G power 1W

On expansion to 400-500 meters wireless transmission

Voltage 12V Current 300mA

Operating temperature -20 ° --- +60 °
Size 65 * 32 * 16mm

Image signal NTSC / PAL

Voice signal 2Vp-p 2K0hm

Product Features:

• This machine adopts international general 5.8GHZ frequency, use of highly integrated RF CMOS IC, highly integrated power amplifier and a voltage controlled oscillator and two-channel audio and video in one of the modulation , the latter stage power amplifier using GaAs chips for Siemens PowerLarge .

• Adopt outstanding high -power transmitter , remote , image stabilization, audio frequency response is the maximum degree of appealing features in the barrier-free environment to use the unit as far as 500 meters from the wireless transmitter , coupled with high-gain parabolic directional antenna, the distance of more than 600M

• Applications: 1 wireless video transmission systems ; 2 wireless monitoring system ; 3 ; baby care system ; 4 wireless camera system ; 5 . remote transceiver system ; 6 wireless doorbell system .


5.8GHz band using internationally accepted open , anti-jamming performance

Wireless Audio Transmitter Technical Specifications Video Input ( 1 channel ) . (6.0MHZ NTSC 6.5MHZ PAL)

Transmitter power : 1000mw maximum current consumption : 300mA Input voltage : 12V Receiver sensitivity :-90dBm

Receiver Maximum current consumption : 160mA Input voltage : 5V video output ( 1 channel ) Receiver sensitivity :-90dBm

• 5.8GHZ wireless video transmitter receiver working temperature: -30-120 degrees , RF radiation Distance: Accessible greater than 400 m

Video Signal System : PAL / NTSC

Audio input impedance 1KΩ, transmitter video input impedance 75Ω, 75Ω output impedance receiver video

Set Accessories

Transmitter (Transmitter) 1 set Receiver (Receiver) 1 set
Power Adapter 2 Omnidirectional antenna 2
Audio Video AV Cable 2

Instructions for use

• Select the device operating frequency. ( Note: The operating frequency of the transmitter and receiver must be consistent , otherwise no image, receiving no signal . )

• Use audio and video cable from your TV or monitor and receiver audio and video output port .

• Install the device antenna. ( Please note that in the antenna installation and uninstallation , please be sure to disconnect the power supply )

• Plug the power matching , power indicator light.

• the transmitter and receiver installed, observe the reception, by adjusting the angle of transmitter and receiver antennas , the sound and the image to achieve the effect of short-tailed bird .

• The device provides four alternative frequency setting switch, channel switch down unplug a valid channel number.

*** Welcome visit our officlal website www.security-warehouse.com for most up-to-date product information, manual and software download, knowledge sharing and industrial news. SECURITY-WAREHOUSE.COM is committed to provide professionalism to maximize our clients purchase satisfaction. ***

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: 5 8G 1W ing audio audio closewireless video transmitter receiver pair for CCTV monitor

Do You Have Any Question ?

5 + 7 = enter the result ex:(3 + 2 = 5)

* required fields

Contact Us

Block 4 West, SEG Technology Park, Hua Qiang Road North, Shenzhen, China



Email Newsletters
Welcome leave us your email address for product update