Machine itself without cards, memory cards.
( In order to ensure the normal operation of the machine , it is recommended in the shop card purchase )
Official standard : the machine , comes with accessories (No memory card can not be used)
The machine features :
Unique design , feel strong
Using high-resolution original image sensor chip , so shoot the picture clearer
Record audio and video synchronization
Video resolution up to 640 * 480 Pixels , 30 frames / sec.
Camera resolution up to 12 million as the number of 4032 * 3024
External three AAA batteries .
Storage support TF card
Far shoot camera host 1 king
USB Cable 1
Small three tripod
Head away from regulation
Held by far beat Wang boot, when far shot 21X zoom adjustment ring 10 toward the direction of rotation, 7X direction towards close-ups
Rotation , targeting , slow tune the focal length 11 until the object ; or use the remote fast tune up look telescopic focal length 12 goals . Be sure to use the telescope to the correct location .
Turn the eyepiece focusing hand wheel 13 to get a clear picture .
When turned on, enter the camera icon appears on the top right of the standby mode A; using screen view finder , please manually adjust
Section of the optical lens part on good scene short press the shutter button once photographed a ; in camera mode, some parameters can be set . Such as setting the resolution ; press the Menu / OK button pop-up menu dialog boxes , such as when the camera is set as the number of the resolution , press the Up and Down keys to select the size as the number , and then press the Menu / OK button to enter the sub-menu , select the corresponding resolution , 12M, 8M, 5M, 3M, 2M, 1.3M; press menu / Enter key to confirm and exit ; other parameters refer to the above operations.
In the photo the standby mode, press the mode button to enter standby video camera icon appears on the top right of the state , short press the shutter button to start the video again , press the shutter button to save the video content . In video mode, press MENU /
Enter the same pop-up menu dialog can be some of the parameter settings. Reference photos parameter settings.
In standby mode , press mode button to switch to the photo browsing mode icon appears in the upper right triangle , through
Over left, right, select the preview photos ; if it is video file, press the button to play back the recorded files ; in the preview photo Shihai can zoom in on the key , the next key to zoom out ; when magnified image after short press MENU / a confirmation key icon can be moved up and down , using the up, down , left , right, you can move the image preview ; in the photo browsing mode, the same number of parameters can be set , and delete files , etc. ; specific operations with the camera parameter settings.
System function settings:
In any standby mode, press the Menu / OK key to enter the parameter setting mode , press the Right to enter the system feature set ; following functions:
1, the memory card is formatted , when choosing runtime system to format the memory card , remove the card all the files ;
2 , set the key sound on and off ;
3 , language settings ;
4 , standby mode , without any operation under the automatic shutdown time setting ;
5 , the recovery system factory settings ;
6, USB settings, you can choose to move the hard disk , PC camera ( need to install driver software ) , the printer is connected ;
7 , the video output format is set
8 , enter time setting : Press the Up and Down key to make the date, hour , minute, second addition and subtraction , left-right points
Do not select the corresponding set each setting is completed , press Menu / Enter key to exit ; then press the button to exit
Menu settings ;
Such as found in the course of non-stop fast flashing blue lights , which means that the host is running low , press to open the key off , and charge it in time , the machine is standard MINI
USB2.0 interface, can be connected to a computer USB port for charging , can also be random distribution of the charger ; charging, the charging indicator red light that is charging , turned off by the long light indicates charging is complete ;
Connect the computer:
In the off state , you can connect the computer , then the computer will pop up movable disk logo , the image file directory as follows: * disk \\ DCIM \\ 100DSCIM; when the king took away when exchanging data with a computer , the blue light flashes rapidly ; need uninstall far shoot king , please click on the task bar bottom right corner of the mobile device management icon , uninstall the inside removable storage device , the system recognizes the hardware can be safely removed , then disconnect the remote shoot the king with the computer.
* required fields
Block 4 West, SEG Technology Park, Hua Qiang Road North, Shenzhen, China