IC card reader, which uses radio frequency receiver module microelectronics and embedded micro-controller, combined with efficient decoding algorithms and advanced data processing techniques. The external card reader as a computer input devices, read RFID card and the serial number through the USB port or PS2 port output to the computer, the keyboard automatically lose the equivalent number of available common \\ \"WORD \\\", \\ \"Notepad \\\" software records the card number, reliable performance, easy operation. Can this record number, derived more management functions.
First, the technical parameters:
Support cards: Mifare standard support, frequency: 13.56MHz compatible card
Communication Format: Extended keyboard code (can be customized according to customer requirements)
Reading distance: more than 70mm reader time: less than 100ms
Power supply: USB port or PS2 port output interface: USB port or PS2 port size: 110 × 80 × 30mm
Second, the installation instructions:
Directly into a computer USB port or PS2 port, card reader sounded twice, the green light flashes twice, indicating a successful installation commonly available \\ \"WORD \\\", \\ \"notepad \\\" and other software testing. Open the \\ \"WORD \\\" or \\ \"Notepad \\\" in the input state credit card, ringing sound, the green light flashes once, \\ \"WORD \\\" or \\ \"Notepad \\\" appears and automatically enter a bunch of numbers, which means that the system is normal, there is the required number RF card serial number.
Third, pay attention and Troubleshooting:
1 card reader installed in convenient operating position, while avoiding near the monitor, the monitor due to radiation may interfere with the normal work of the reader.
2, when the card is not recommended to operate the mouse, avoid transferring data error.
3, the communication cable length between the reader and the computer should be less than 5 meters.
4, to avoid the critical state (just to reader distance) reader.
5, the card did not respond: The interface is plugged in; RF card whether it is compatible with RFID cards; RF card is already bad; whether another radio card is in the reader range.
7, transfer data error: When the card is operating a mouse; whether it is strong electromagnetic interference environments reader; communication cable between the reader and the computer is too long; reader is in a critical state
* required fields
Block 4 West, SEG Technology Park, Hua Qiang Road North, Shenzhen, China