RFID IC card reader access control card dispenser drive free USB card reader R10C
RFID IC card reader access control card dispenser drive free USB card reader [ R10C ]
the technical parameters:
- Type : R10C
- Support cards: m1 standard support , frequency: 13.56MHz compatible card
- Communication Format : Extended keyboard code ( can be customized according to customer requirements )
- Reading distance : more than 70mm
- Reader Time: Less than 100ms
- Power supply : USB to take power
- Output Interface : Hi-Speed USB
- Size : 110 × 80 × 30mm
the installation instructions :
Connect the USB cable , card reader sounds twice , the green light flashes twice , indicating a successful installation
pay attention and Troubleshooting:
1 card reader installed in convenient operating position , while avoiding near the monitor, the monitor due to radiation may interfere with the normal work of the reader .
2 , when the card is not recommended to operate the mouse , avoid transferring data error .
3, the communication cable length between the reader and the computer should be less than 15 meters .
4, to avoid the critical state ( just to reader distance ) reader .
5, USB wiring is correct.
6 , no response card : Interface is plugged ; RF card is a compatible RFID cards ; RF card is already bad ; whether another radio card is in the reader range.
7 , transfer data error : When the card is operating a mouse ; whether it is strong electromagnetic interference environments reader ; communication cable between the reader and the computer is too long ; reader is in a critical state .
SKU | R10C |
---|---|
Weight | 0.250000 |
With Built-in Battery | No |
Still have a question? No worries.